Peer Sa-Request-Policy; Reset Msdp Peer - H3C MSR 20-20 Command Reference Manual

1378 C 89: MSDP C
HAPTER

peer sa-request-policy

Syntax
View
Parameter
Description
Related command:
Example

reset msdp peer

Syntax
View
C
ONFIGURATION OMMANDS
<Sysname> system-view
[Sysname] acl number 3100
[Sysname-acl-adv-3100] rule permit ip source 170.15.0.0 0.0.255.255
destination 225.1.0.0 0.0.255.255
[Sysname-acl-adv-3100] quit
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 connect-interface ethernet 1/0
[Sysname-msdp] peer 125.10.7.6 sa-policy export acl 3100
peer peer-address sa-request-policy [ acl acl-number ]
undo peer peer-address sa-request-policy
Public instance MSDP view, VPN instance MSDP view
peer-address: MSDP peer address.
acl-number: Basic ACL number, in the range of 2000 to 2999. If you provide this
argument, the SA requests of only the multicast groups that match the ACL will be
accepted and other SA requests will be ignored; if you do not provide this
argument, all SA requests will be ignored.
Use the
peer sa-request-policy
request messages.
Use the undo peer sa-request-policy
request filtering rule.
Be default, SA request messages are not filtered.
display msdp peer-status.
# Configure an SA request filtering rule in the public instance so that SA messages
from the MSDP peer 175.58.6.5 will be accepted only if the multicast group
address in the SA messages is in the range of 225.1.1.0/24.
<Sysname> system-view
[Sysname] acl number 2001
[Sysname-acl-basic-2001] rule permit source 225.1.1.0 0.0.0.255
[Sysname-acl-basic-2001] quit
[Sysname] msdp
[Sysname-msdp] peer 175.58.6.5 sa-request-policy acl 2001
reset msdp [ vpn-instance vpn-instance-name | all-instance ] peer [ peer-address ]
User view
command to configure a filtering rule for SA
command to remove the configured SA