Display Pim Join-Prune - H3C MSR 20-20 Command Reference Manual

1398 C 90: PIM C
HAPTER

display pim join-prune

Syntax
View
C
ONFIGURATION OMMANDS
Table 340 Description on the fields of the display pim interface verbose command
Field
Interface
PIM version
PIM mode
PIM DR
PIM DR Priority (configured)
PIM neighbor count
PIM hello interval
PIM LAN delay (negotiated)
PIM LAN delay (configured)
PIM override interval (negotiated)
PIM override interval (configured)
PIM neighbor tracking (negotiated)
PIM neighbor tracking (configured)
PIM generation ID
PIM require generation ID
PIM hello hold interval
PIM assert hold interval
PIM triggered hello delay
PIM J/P interval
PIM J/P hold interval
PIM BSR domain border
Number of routers on network not using DR priority
Number of routers on network not using LAN delay
Number of routers on network not using neighbor
tracking
display pim [ vpn-instance vpn-instance-name | all-instance ] join-prune mode { sm
[ flags flag-value ] | ssm } [ interface interface-type interface-number | neighbor
neighbor-address ] * [ verbose ]
Any view
Description
Interface name and its IP address
Running PIM version
PIM mode, dense or sparse
DR IP address
Configured priority for DR election
Total number of PIM neighbors
Hello interval
Negotiated prune delay
Configured prune delay
Negotiated prune override interval
Configured prune override interval
Negotiated neighbor tracking status
(enabled/disabled)
Configured neighbor tracking status
(enabled/disabled)
Generation_ID value
Rejection of Hello messages without
Generation_ID (enabled/disabled)
PIM neighbor timeout time
Assert timeout time
Maximum delay of sending hello
messages
Join/prune interval
Join/prune timeout time
BSR administrative scoping status
(enabled/disabled)
Number of routers not using the DR
priority field on the subnet where the
interface resides
Number of routers not using the LAN
delay field on the subnet where the
interface resides
Number of routers not using neighbor
tracking on the subnet where the
interface resides