Pim Ipv6 Hello-Option Override-Interval; Pim Ipv6 Holdtime Assert - H3C MSR 20-20 Command Reference Manual

1488 C 93: IP 6 PIM C
HAPTER V
Related command:
Example

pim ipv6 hello-option override-interval

Syntax
View
Parameter
Description
Related command:
Example

pim ipv6 holdtime assert

Syntax
View
Parameter
Description
C
ONFIGURATION OMMANDS
hello-option neighbor-tracking (IPv6 PIM view).
# Disable join suppression on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 hello-option neighbor-tracking
pim ipv6 hello-option override-interval interval
undo pim ipv6 hello-option override-interval
Interface view
interval: Prune override interval in milliseconds, with an effective range of 1 to
65,535.
Use the
pim ipv6 hello-option override-interval
prune override interval on the current interface.
Use the undo pim ipv6 hello-option override-interval
the default setting.
By default, the prune override interval is 2,500 milliseconds.
pim ipv6 hello-option lan-delay, hello-option lan-delay (IPv6 PIM view),
and hello-option override-interval (IPv6 PIM view).
# Set the prune override interval to 2,000 milliseconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 hello-option override-interval 2000
pim ipv6 holdtime assert interval
undo pim ipv6 holdtime assert
Interface view
interval: Assert timeout time in seconds, with an effective range of 7 to
2,147,483,647.
Use the
pim ipv6 holdtime assert
time on the current interface.
command to configure the
command to configure the assert timeout
command to restore