Natpt V6Bound Static; Reset Natpt Dynamic-Mappings - H3C MSR 20-20 Command Reference Manual

Description
Example

natpt v6bound static

Syntax
View
Parameter
Description
Example

reset natpt dynamic-mappings

Syntax
View
Parameter
Description
Example
Use the
natpt v6bound dynamic
for packets going from an IPv6 node to an IPv4 node.
Use the
undo natpt v6bound dynamic
dynamic mapping.
# Translate the source address of an IPv6 packet that matches IPv6 ACL 2001 into
an IPv4 address in address pool 1.
<Sysname> system-view
[Sysname] natpt address-group 1 2.3.4.5 2.3.4.10
[Sysname] natpt v6bound dynamic acl6 number 2001 address-group 1
natpt v6bound static ipv6-address ipv4-address
undo natpt v6bound static ipv6-address ipv4-address
System view
ipv6-address: Source IPv6 address to be mapped.
ipv4-address: IPv4 address to which an IPv6 address is mapped.
Use the
natpt v6bound static
address mapping.
Use the undo natpt v6bound static
address mapping.
# Configure the static mapping between the source IPv6 address 2001::1 and the
IPv4 address 2.3.4.5.
<Sysname> system-view
[Sysname] natpt v6bound static 2001::1 2.3.4.5
reset natpt dynamic-mappings
User view
None
Use the
reset natpt dynamic-mappings
address mappings.
# Clear dynamic NAT-PT address mappings.
command to configure a dynamic mapping
command to remove the configured
command to configure the static IPv6-to-IPv4
command to remove the static IPv6-to-IPv4
command to clear dynamic NAT-PT
875