Display Isis Traffic-Eng Advertisements - H3C MSR 20-20 Command Reference Manual

display isis traffic-eng advertisements

Syntax
View
Parameter
Description
Example
7 2.1.1.30
8 1.1.1.30
9 9.4.4.4
Table 388 Description on the fields of the display explicit-path command
Field
Path Name
Path Status
display isis traffic-eng advertisements [ level-1 | level-1-2 | level-2 ] [ lsp-id lsp-id |
local ] [ process-id | vpn-instance vpn-instance-name ]
Any view
level-1: Displays the TE information of IS-IS Level-1 routers.
level-1-2: Displays the TE information of IS-IS Level-1-2 routers.
level-2: Displays the TE information of IS-IS Level-2 routers.
lsp-id lsp-id: Specifies a link state packet ID (LSP ID) to display the TE information
advertised by it. For more information about IS-IS LSP, refer to "IS-IS Configuration
Commands" on page 1037.
local: Displays local TE information.
process-id: Specifies an IS-IS process ID, in the range 1 to 65535.
vpn-instance vpn-instance-name: Specifies a VPN instance. The
vpn-instance-name argument is a string of 1 to 31 characters. For the default VPN
instance, you do not need to configure this keyword and argument combination.
Use the
display isis traffic-eng advertisements
latest TE information advertised by IS-IS TE.
If no IS-IS level is specified, the TE information of IS-IS Level-1-2 routers is
displayed.
# Display the latest TE information advertised by IS-IS TE.
<Sysname> display isis traffic-eng advertisements
Level-1 Link State Database
---------------------------
LSPID
0000.0000.0001.00-00* 0x00000001
NLPID : IPV4
AREA ADDR : 00.0005
Strict
Strict
Strict
Description
Explicit path name
Explicit path status
TE information for ISIS(1)
--------------------------
LSP Seq Num LSP Checksum
0x3f57
Include
Include
Include
command to display the
LSP Holdtime ATT/P/OL
534 0/0/0
1567