Display Multicast Ipv6 Boundary; Display Multicast Ipv6 Forwarding-Table - H3C MSR 20-20 Command Reference Manual

91

display multicast ipv6 boundary

Syntax
View
Parameter
Description
Related command:
Example

display multicast ipv6 forwarding-table

Syntax
IP 6 M
V ULTICAST
F
ORWARDING
C
OMMANDS
display multicast ipv6 boundary [ ipv6-group-address [ prefix-length ] | interface
interface-type interface-number ]
Any view
ipv6-group-address: IPv6 multicast group address, in the range of FFxy::/16, where
x and y represent any hexadecimal number from 0 through F.
prefix-length: Prefix length of the IPv6 multicast group address, in the range of 8
to 128. The system default is 128.
interface-type interface-number: Interface type and interface number.
Use the
display multicast ipv6 boundary
multicast boundary information on the specified interface or all interfaces.
multicast ipv6 boundary.
# Display the IPv6 multicast boundary information configured on all interfaces.
<Sysname> display multicast ipv6 boundary
IPv6 multicast boundary information
Boundary
FF03::/16
FF09::/16
Table 345 Description on the fields of the display multicast ipv6 boundary command
Field Description
Boundary IPv6 multicast group corresponding to the IPv6 multicast boundary
Interface Boundary interface corresponding to the IPv6 multicast boundary
display multicast ipv6 forwarding-table [ ipv6-source-address [ prefix-length ] |
ipv6-group-address [ prefix-length ] | incoming-interface { interface-type
interface-number | register } | outgoing-interface { { exclude | include | match }
{ interface-type interface-number | register } } | statistics ] [ port-info ]
R
OUTING AND
C
ONFIGURATION
command to display the IPv6
Interface
Eth1/0
Pos5/0