H3C MSR 20-20 Command Reference Manual page 1092

1092 C 75: IS-IS D
HAPTER
C
EBUGGING OMMANDS
Table 243 Description on the fields of the debugging isis adjacency command
Field
Rxed helloType IIH on circuitName contains
Duplicate Ip Address. IIH Discarded
Rxed helloType IIH on % circuitName contains
Duplicate Ipv6 Address. IIH Discarded
Rxed Serial IIH on circuitName, Protocol
supported mismatch. IIH Discarded
Rxed P2P IIH on % circuitName contains no
Protocol Support at all. IIH Ignored
Rxed Ethernet IIH on circuitName. Ignored
helloType Level Mismatch.Local Level
circuitLevel
helloType, No common protocol supported
Rxed LAN IIH from system : %systemId
Rxed P2P IIH from system : %systemId
Rxed ISH from system : %systemId
Table 244 Description on the fields of the debugging isis authentication-error command
Field
For all processes of the VPN instance
vpn-instance-name, Indication of
authentication errors debugging is on
For the process process-id, Indication of
authentication errors debugging is on
Description
The received hello packet was discarded
because it contains a duplicate IP address.
helloType: Hello packet type: LAN L1, LAN L2,
or P2P.
circuitName: Interface name
The received hello packet was discarded
because it contains a duplicate IPv6 address.
helloType: PDU packet type: LAN L1, LAN L2,
or P2P.
circuitName: Interface name
The received hello packet was discarded due
to a protocol mismatch.
circuitName: Interface name
The received hello packet was discarded due
to no protocol support.
circuitName: Interface name
The received Ethernet IIH packet was
discarded because the interface type is not
broadcast.
circuitName: Interface name
Packet type mismatch
helloType: Hello packet type: LAN L1, LAN L2,
or P2P.
circuitLevelI: Current level of the link. It can be
L1, L2, or L12.
The received hello packet matched no
protocol.
helloType: Hello packet type: LAN L1, LAN L2,
or P2P.
IS-IS received an Ethernet IIH packet.
systemId: System ID of the sending device.
IS-IS received a P2P IIH packet.
systemId: System ID of the sending device.
IS-IS received an ISH packet.
systemId: System ID of the sending device.
Description
The authentication error debugging is enabled
for all the IS-IS processes of the VPN instance.
The authentication error debugging is enabled
for the IS-IS process.