H3C MSR 20-20 Command Reference Manual page 1537

Description
Related command:
Example
Use the
display mpls statistics lsp
specified or all LSPs.
To display the statistics, set the statistics interval first. By default, the interval is 0
and the system does not collect LSP statistics, in which case the value of every
statistical item is 0.
statistics interval.
# Display MPLS statistics for all LSPs.
<Sysname> display mpls statistics lsp all
Statistics for Lsp IN : LSP Name /LSP Index :
InSegment
Octets
Packets
Errors
Down
Start Time
End Time
Statistics for Lsp OUT : LSP Name /LSP Index :
OutSegment
Octets
Packets
Errors
Down
Start Time
End Time
Statistics for Lsp IN : LSP Name /LSP Index :
InSegment
Octets
Packets
Errors
Down
Start Time
End Time
Statistics for Lsp OUT : LSP Name /LSP Index :
OutSegment
Octets
Packets
Errors
Down
Start Time
End Time
Table 387 Description on the fields of the display mpls statistics lsp command
Field
Statistics for Lsp IN : LSP Name /LSP Index :
DynamicLsp/10241
InSegment
OutSegment
Octets
Packets
Errors
Down
Start Time
End Time
command to display MPLS statistics for a
DynamicLsp/9217
: 0
: 0
: 0
: 0
: 2006/05/20 15:52:30
: 2006/05/20 15:52:30
DynamicLsp/9217
: 0
: 0
: 0
: 0
: 0000/00/00 00:00:00
: 0000/00/00 00:00:00
DynamicLsp/9218
: 0
: 0
: 0
: 0
: 0000/00/00 00:00:00
: 0000/00/00 00:00:00
DynamicLsp/9218
: 0
: 0
: 0
: 0
: 2006/05/20 15:52:30
: 2006/05/20 15:52:30
Description
Statistics for LSP DynamicLsp/10241 in the
incoming direction
Information about the LSP in the incoming
direction
Information about the LSP in the outgoing
direction
Bytes of data processed
Number of packets processed
Number of errors
Number of packets discarded
Start time of the statistics
End time of the statistics
1537