Example
vty telnet remote
Syntax
View
Parameters
Description
Example
vty tty remote
Syntax
View
Parameters
# Set the screen code for VTY 1 to E!9Q.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] vty 1 screencode E!9Q
vty vty-number telnet remote ip-address [ port-number ] [ source source-ip ]
undo vty vty-number
Terminal template view
vty-number: VTY number, ranging 0 to 7.
ip-address: FEP IP address.
port-number: Listening Telnet port on the FEP. It ranges 1 to 50000 and defaults to
23.
source source-ip: Source IP address bound.
Use the
vty telnet remote
Use the
command to remove the specified VTY.
undo vty
Note that, after this configuration, no more RTC client VTYs or RTC server VTYs
can be configured in the template of the VTY.
# Create a VTY for Telnet terminal access, setting the FEP IP address to 1.1.1.1.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] vty 1 telnet remote 1.1.1.1
vty vty-number tty remote ip-address port-number [ source source-ip ]
undo vty vty-number
Terminal template view
vty-number: VTY number, ranging 0 to 7.
ip-address: FEP IP address.
port-number: Listening port number of the ttyd program on the FEP, ranging 1024
to 50000.
command to create a VTY for Telnet terminal access.
925