Igmp Static-Group - H3C MSR 20-20 Command Reference Manual

Example

igmp static-group

Syntax
View
Parameter
Description
Example
# Disable insertion of the Router-Alert option into IGMP messages that leave
Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] undo igmp send-router-alert
igmp static-group group-address [ source source-address ]
undo igmp static-group { all | group-address [ source source-address ] }
Interface view
all: Specifies to remove all static multicast groups that the current interface has
joined.
group-address: Multicast group address, in the range of 224.0.1.0 to
239.255.255.255.
source-address: Multicast source address.
Use the
igmp static-group
statically connected member of the specified multicast group.
Use the undo igmp static-group
statically connected member of the specified multicast group.
By default, an interface is not a static member of any multicast group.
If the specified multicast address is in the SSM multicast address range, and if a
multicast source address is specified in the command, multicasts carrying the (S, G)
entry, namely the source address information, can be sent out through this
interface.
# Configure Ethernet 1/0 to be a statically connected member of multicast group
224.1.1.1.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] igmp static-group 224.1.1.1
# Configure Ethernet 1/0 so that it can forward multicasts that multicast source
192.168.1.1 sends to multicast group 232.1.1.1.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] igmp static-group 232.1.1.1 source 192.168.1.1
command to configure the current interface to be a
command to remove the current interface as a
1355