Mld Max-Response-Time; Mld Require-Router-Alert - H3C MSR 20-20 Command Reference Manual

Example

mld max-response-time

Syntax
View
Parameter
Description
Related command:
Example

mld require-router-alert

Syntax
View
Parameter
# Set the last listener query interval to 3 seconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] mld last-listener-query-interval 3
mld max-response-time interval
undo mld max-response-time
Interface view
interval: Maximum response delay for MLD general query messages in seconds, in
the range of 1 to 25.
Use the
mld max-response-time
response delay for MLD general query messages on the interface.
Use the undo mld max-response-time
configuration.
By default, the maximum response delay for MLD general query messages is 10
seconds.
The maximum response delay determines the time which the device takes to
detect directly attached group members in the LAN.
max-response-time (MLD view), mld timer other-querier-present, and
display mld interface.
# Set the maximum response delay for MLD general query messages to 8 seconds
on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] mld max-response-time 8
mld require-router-alert
undo mld require-router-alert
Interface view
None
command to configure the maximum
command to restore the default
1451