Vty Description; Vty Hotkey - H3C MSR 20-20 Command Reference Manual

vty description

Syntax
View
Parameters
Description
Example

vty hotkey

Syntax
View
Parameters
Description
vty vty-number description string
undo vty vty-number description
Terminal template view
vty-number: VTY number, ranging 0 to 7.
string: VTY description, a string of 1 to 31 characters.
Use the vty description
Use the
undo vty description
By default, no description is configured for a VTY.
For a VTY of a service, you are recommended to use the service name as the
description information of the VTY for convenience.
# Set the description information of VTY 1 to chuxu.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] vty 1 description chuxu
vty vty-number hotkey ascii-code&<1-3>
undo vty vty-number hotkey
Terminal template view
vty-number: VTY number, ranging 0 to 7.
ascii-code&<1-3>: ASCII value of the hotkey, ranging 1 to 255. "&<1-3>" means
that you can provide up to three ASCII values.
Use the vty-number hotkey command to set the hotkey for VTY fast
vty
switching.
Use the vty-number hotkey command to cancel the hotkey
undo vty
configured.
By default, no hotkey is configured for VTY fast switching.
Terminal access supports VTY switching, allowing you to switch between
applications. In terminal access, each terminal can be logically divided into eight
command to configure a description for a VTY.
command to remove the description for a VTY.
921