Display Bgp Routing-Table - H3C MSR 20-20 Command Reference Manual

968 C 72: BGP C
HAPTER

display bgp routing-table

Syntax
View
Parameters
Description
Examples
C
ONFIGURATION OMMANDS
Table 218 Description on the fields of the display bgp peer command
Field
Peer optional capabilities
Address family IPv4 Unicast
Received
Sent
Maximum allowed prefix number
Threshold
Minimum time between
advertisement runs
Optional capabilities
Peer Preferred Value
Routing policy configured
display bgp routing-table [ ip-address [ { mask | mask-length } [ longer-prefixes ] ] ]
Any view
ip-address: Destination IP address.
mask: Network mask, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
longer-prefixes: Matches the longest prefix.
Use the
display bgp routing-table
information in the BGP routing table.
# Display BGP routing table information.
<Sysname> display bgp routing-table
Total Number of Routes: 1
BGP Local router ID is 10.10.10.1
Status codes: * - valid, > - best, d - damped,
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
Network
*> 40.40.40.0/24
Table 219 Description on the fields of the display bgp routing command
Field Description
Total Number of Total Number of Routes
Routes
Description
Optional capabilities supported by the peer, including
BGP multiple extension and routing refresh.
Routes are advertised and received in the form of IPv4
unicast
Total numbers of received packets and updates
Total numbers of sent packets and updates
Maximum allowed prefix number
Threshold value
Minimum time between route advertisements
Optional capabilities enabled by the peer
Preferred value specified for the routes from the peer
Local routing policy
command to display specified BGP routing
i - internal, s - suppressed, S - Stale
NextHop MED
20.20.20.1
LocPrf PrefVal Path/Ogn
0 200 300i