H3C MSR 20-20 Command Reference Manual page 1116

1116 C 76: OSPF C
HAPTER
C
ONFIGURATION OMMANDS
<Sysname> display ospf brief
OSPF Process 1 with Router ID 192.168.1.2
RouterID: 192.168.1.2
Route Tag: 0
Multi-VPN-Instance is not enabled
Applications Supported: MPLS Traffic-Engineering
SPF-schedule-interval: 5 0 5000
LSA generation interval: 5 0 5000
LSA arrival interval: 1000
Default ASE Parameter: Metric: 1 Tag: 1 Type: 2
Route Preference: 10
ASE Route Preference: 150
SPF Computation Count: 22
RFC 1583 Compatible
Area Count: 1
ExChange/Loading Neighbors: 0
Area: 0.0.0.1
Authtype: None Area flag: NSSA
SPF Scheduled Count: 5
ExChange/Loading Neighbors: 0
Interface: 192.168.1.2 (Ethernet1/0)
Cost: 1
Priority: 1
Designated Router: 192.168.1.2
Backup Designated Router: 192.168.1.1
Timers: Hello 10 , Dead 40 , Poll
ay 1
Table 264 Description on the fields of the display ospf brief command
Field
RouterID
Border Router
Route Tag
Multi-VPN-Instance is not enabled
Applications Supported
SPF-schedule-interval
LSA generation interval
LSA arrival interval
Default ASE Parameter
Route Preference
ASE Route Preference
SPF Computation count
RFC1583 Compatible
Area Count
Nssa Area Count
ExChange/Loading Neighbors
OSPF Protocol Information
Border Router:
Nssa Area Count: 1
(MPLS TE
State: DR Type: Broadcast
Description
Router ID of this router
An ABR, ASBR or NSSA ABR
The tag of redistributed routes
The current OSPF process supports no
multi-VPN-instance
Applications supported
Interval for SPF calculation
LSA generation interval
The minimum LSA repeat arrival interval
Default ASE Parameter: metric, tag, route type.
Internal route priority
External route priority
SPF computation count of the OSPF process
Compatible with routing rules defined in RFC1583
Area number of the current process
NSSA area number of the current process
Neighbors in ExChange/Loading state
NSSA
not enabled)
MTU: 1500
40 , Retransmit 5 , Transmit Del