Maximum-Routes; Maximum Load-Balancing (Ospf View) - H3C MSR 20-20 Command Reference Manual

1140 C 76: OSPF C
HAPTER
Description
Examples

maximum load-balancing (OSPF view)

Syntax
View
Parameters
Description
Examples

maximum-routes

Syntax
View
Parameters
C
ONFIGURATION OMMANDS
Use the lsdb-overflow-limit
LSAs in the LSDB.
Use the
undo lsdb-overflow-limit
External LSAs in the LSDB are unlimited by default.
# Specify the upper limit of external LSAs as 400000.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] lsdb-overflow-limit 400000
maximum load-balancing maximum
undo maximum load-balancing
OSPF view
maximum: Maximum number of load-balanced routes, in the range 1 to 8. A
maximum of 1 means no load balancing is enabled.
Use the
maximum load-balancing
of load-balanced routes.
Use the
undo maximum load-balancing
# Specify the maximum number of load-balanced routes as 2.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] maximum load-balancing 2
maximum-routes { external | inter | intra } number
undo maximum-routes { external | inter | intra }
OSPF view
external: Specifies the maximum number of external routes.
inter: Specifies the maximum number of inter-area routes.
intra: Specifies the maximum number of intra-area routes.
number: Maximum route number in the range 1 to 10000.
command to specify the upper limit of external
command to cancel limitation.
command to specify the maximum number
command to restore the default.