Display Qos Gts Interface - H3C MSR 20-20 Command Reference Manual

display qos gts interface

Syntax
View
Parameters
Description
Examples
106
T S
RAFFIC HAPING
C
OMMANDS
display qos gts interface [ interface-type interface-number ]
Any view
interface-type interface-number: Specifies an interface by its type and number.
Use the
display qos gts interface
accounting information of certain interface or all interfaces.
If no interface is specified, the GTS configuration and running statistics of all
interfaces will be displayed.
# Display GTS configuration and accounting information of all interfaces.
<Sysname> display qos gts interface
Interface: Ethernet1/0
Rule(s): If-match ACL
CIR 200(kbps), CBS
Queue Length: 100 (Packet)
Queue Size: 70 (Packet)
Passed: 0/0 (Packets/Bytes)
Discarded: 0/0 (Packets/Bytes)
Delayed: 0/0 (Packets/Bytes)
Table 474 Description on the fields of the display qos gts command
Field Description
Interface Interface name, consisting of interface type and interface number
Rule(s) Matching rules of packets, which can be any of the three
CIR Committed Information Rate, in kbps
CBS Committed Burst Size, i.e. the depth of token bucket carrying burst traffic, in
byte
EBS Excess Burst Size, i.e. the size of the burst traffic exceeding the committed
traffic in dual-token bucket algorithm, in byte
Queue Length Length of packets that a buffer queue can hold.
Queue Size Number of packets in the current buffer
Passed Number and byte number of passed packets.
C
ONFIGURATION
command to view GTS configuration and
2001
50000(byte), EBS 0(byte)
1775