H3C MSR 20-20 Command Reference Manual page 1529

1529
interface-type interface-number: Specifies an interface by its type and number.
in-label-value: Value of the incoming label, in the range 0 to 1048575.
out-label-value: Value of the outgoing label, in the range 0 to 1048575.
exclude: Excludes the specified FEC.
include: Includes the specified FEC.
dest-addr: Destination address.
mask-length: Length of the mask for the destination address, in the range 0 to 32.
vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31
characters.
asbr: Displays information about ASBR established LSPs.
protocol: Displays information about LSPs established by a specified protocol.
bgp: Displays information about BGP LSPs.
bgp-ipv6: Displays information about IPv6 BGP LSPs, that is, BGP4+ LSPs.
crldp: Displays information about LDP CR-LSPs.
ldp: Displays information about LDP LSPs.
rsvp-te: Displays information about CR-LSPs established by RSVP-TE.
static: Displays information about static LSPs.
static-cr: Displays information about static CR-LSPs.
egress: Displays information about LSPs taking the current LSR as egress.
ingress: Displays information about LSPs taking the current LSR as ingress.
transit: Displays information about LSPs taking the current LSR as transit LSR.
verbose: Displays detailed information.
Description Use the command to display information about LSPs.
display mpls lsp
With no parameters specified, the command displays information about all LSPs.
Related command: display mpls lsp, display mpls statistics lsp, display mpls static-lsp.
n
This command supports these interface types: serial interface, async interface,
Layer 3 Ethernet interface (Ethernet interface, GE interface, and XGE interface),
ATM interface, POS interface, Layer 3 virtual Ethernet interface (that is,
virtual-Ethernet interface), virtual template, Mp-group interface, MFR interface,
tunnel interface, and VLAN interface.