H3C MSR 20-20 Command Reference Manual page 1732

1732 C 100: VAM C
HAPTER
Parameter
Description
Example
C C
LIENT ONFIGURATION OMMANDS
address-map: Refers to the mapping information between public and private
network addresses of the VAM client.
fsm: Refers to the status information of the VAM client.
client-name: VAM client name, a case-insensitive string of 1 to 31 characters.
Use the display vam client
VAM client.
On a Spoke, the command displays the address mapping information of the other
Spokes and the Hubs that is received from the VAM server. On a Hub, the
command displays the address mapping information of the other Hubs that is
received from the VAM server.
Note that:
If client-name is specified, the registration information of a specific VAM client
■
is displayed.
If client-name is not specified, the registration information of all VAM clients is
■
displayed.
As for the arguments not specified, or the information not obtained
■
dynamically, the corresponding information will not be displayed.
# Display the status information of VAM client abc.
<Sysname> display vam client fsm abc
Client name: hub
VPN name: 1
Interface: Tunnel0
Resend interval(seconds): 5
Client type: Hub
Username: user1
Primary server:
Current state:
Holding time:
Encryption-algorithm:
Authentication-algorithm: SHA1
Secondary server: 28.1.1.33
Current state:
Holding time:
Encryption-algorithm:
Authentication-algorithm: SHA1
Table 464 Description on the fields of the display vam client fsm command
Field
Client name
VPN name
Interface
Resend interval(seconds)
Client type
Username
command to display registration information of the
28.1.1.23
ONLINE
9h 20m 30s
AES-128
OFFLINE
1h 24m 1s
AES-128
Description
Name of the VAM client
Name of the VPN domain where the VAM client resides
DVPN tunnel interface of the VAM client
Protocol message retransmission interval of the VAM client
VAM client type, Hub or Spoke
Username of the VAM client