C-Bsr Hash-Length (Ipv6 Pim View) - H3C MSR 20-20 Command Reference Manual

1462 C 93: IP 6 PIM C
HAPTER V
Description
Related command:
Example

c-bsr hash-length (IPv6 PIM view)

Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION OMMANDS
hash-length: Hash mask length for RP selection calculation, in the range of 0 to
128. If you do not include this keyword in your command, the corresponding
global setting will be used.
priority: Priority of the C-BSR, in the range of 0 to 255. If you do not include this
keyword in your command, the corresponding global setting will be used. A larger
value means a higher priority.
Use the command to configure the specified interface a C-BSR.
c-bsr
Use the undo c-bsr
No C-BSR is configured by default.
pim ipv6 sm, c-bsr hash-length (IPv6 PIM view), c-bsr priority (IPv6 PIM
view) and c-rp (IPv6 PIM view).
# Configure the interface with an IPv6 address of 1101::1 as a C-BSR.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr 1101::1
c-bsr hash-length hash-length
undo c-bsr hash-length
IPv6 PIM view
hash-length: Hash mask length for RP selection calculation, in the range of 0 to
128.
Use the c-bsr hash-length
for RP selection calculation.
Use the
undo c-bsr hash-length
By default, the Hash mask length for RP selection calculation is 126.
c-bsr (IPv6 PIM view) on page 1461.
# Set the global Hash mask length for RP selection calculation to 16.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr hash-length 16
command to remove the related C-BSR configuration.
command to configure the global Hash mask length
command to restore the system default.