1744
C
102: DVPN T
HAPTER
dvpn session dumb-time
Syntax
View
Parameter
Description
C
C
UNNEL
ONFIGURATION
OMMANDS
Private IP:
Public IP:
Tunnel type:
State:
SUCCESS
Holding time: 0h 44m 9s
Input:
279 packets,
91 multicasts,
Output: 273 packets,
91 multicasts,
Table 467 Description on the fields of the display dvpn session command
Field
Interface
Total number
Private IP
Public IP
Tunnel type
State
Holding time
Input
Output
dvpn session dumb-time time-interval
undo dvpn session dumb-time
Tunnel interface view
time-interval: Quiet period after the DVPN tunneling fails in seconds, in the range
10 to 600.
Use the
dvpn session dumb-time
when the attempts for DVPN tunneling reach the maximum value. After the quiet
period elapsed, the device initiates a new DVPN tunneling.
Use the
undo dvpn session dumb-time
By default, the quiet period is 120 seconds.
Note that the VAM client triggers the quiet timer only when the attempts for
tunneling the Hub reach the maximum value.
10.0.0.22
28.1.1.22
Hub-Spoke
100 data packets,
0 errors
99 data packets,
0 errors
Description
DVPN tunnel interface
Total number of DVPN tunnels established on the tunnel interface
Private address of the DVPN tunnel peer
Public address of the DVPN tunnel peer
Type of the DVPN tunnel
Status of the DVPN tunnel, which can be SUCCESS, ESTABLISH, or
DUMB.
SUCCESS: Indicates that the tunnel is already established.
■
ESTABLISH: Indicates that the tunnel is being established.
■
DUMB: Indicates that the tunnel failed to be established and is now
■
quiet.
Length of time that the tunnel is in the current state
Statistics about inbound packets, including the counts of all packets, data
packets, control packets, multicast packets, and erroneous packets.
Statistics about outbound packets, including the counts of all packets,
data packets, control packets, multicast packets, and erroneous packets.
command to configure the quiet period
179 control packets
174 control packets
command to restore the default.