Display Bgp Group - H3C MSR 20-20 Command Reference Manual

964 C 72: BGP C
HAPTER
Related commands:
Examples

display bgp group

Syntax
View
Parameters
Description
Examples
C
ONFIGURATION OMMANDS
import-route (BGP/BGP-VPN instance view).
# In BGP view, allow default route redistribution from OSPF into BGP.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] default-route imported
[Sysname-bgp] import-route ospf 1
# In BGP-VPN instance view, enable redistributing default route from OSPF into
BGP (the VPN has been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] default-route imported
[Sysname-bgp-vpn1] import-route ospf 1
display bgp group [ group-name ]
Any view
group-name: Peer group name, a string of 1 to 47 characters.
Use the
display bgp group
group.
# Display the information of the peer group aaa.
<Sysname> display bgp group aaa
BGP peer-group is aaa
remote AS 200
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer
2.2.2.1
Table 215 Description on the fields of the display bgp group command
Field
BGP peer-group
remote AS
type
Maximum allowed prefix number
Threshold
command to display the information of the peer
V AS MsgRcvd MsgSent
4 200 0
Description
Name of the BGP peer group
AS number of peer group
Type of the BGP peer group: IBGP or EBGP
Maximum allowed prefix number
Threshold value
OutQ PrefRcv Up/Down
0 0 0 00:00:35 Active
State