Apply Local-Preference; Apply Mpls-Label - H3C MSR 20-20 Command Reference Manual

1192 C 78: R
HAPTER OUTING

apply local-preference

Syntax
View
Parameters
Description
Related commands:
Examples

apply mpls-label

Syntax
View
Parameters
Description
Examples
P C C
OLICY OMMON ONFIGURATION
apply local-preference preference
undo apply local-preference
Routing policy view
preference: BGP local preference, in the range 0 to 4294967295.
Use the
apply local-preference
preference to BGP routes.
Use the
undo apply local-preference
configuration.
No local preference is set for BGP routing information by default.
route-policy.
# Create routing policy policy1 with node 10, matching mode as permit. If a route
matches AS-path-ACL 1, set the local preference for the route to 130.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match as-path 1
[Sysname-route-policy] apply local-preference 130
apply mpls-label
undo apply mpls-label
Routing policy view
None
Use the apply mpls-label
Use the
undo apply mpls-label
No MPLS label is set by default.
If MPLS label failed to apply, the routing information can not be advertised.
# Create routing policy policy1 with node 10, matching mode as permit. If a route
matches AS-path-ACL 1, set MPLS label for the route.
C
OMMANDS
command to apply the specified local
command to remove the clause
command to set MPLS label for routing information.
command to remove the clause configuration.