Display Ospf Routing - H3C MSR 20-20 Command Reference Manual

1128 C 76: OSPF C
HAPTER

display ospf routing

Syntax
View
Parameters
Description
Examples
C
ONFIGURATION OMMANDS
The Router's Neighbor is Router ID 2.2.2.2
Interface 10.1.1.1
Retransmit list:
Type
Router
Network
Sum-Net
Table 275 Description on the fields of the display ospf retrans-queue command
Field
The Router's Neighbor is Router ID
Address
Interface
Area
Retrans List
Type
LinkState ID
AdvRouter
Sequence
Age
display ospf [ process-id ] routing [ interface interface-type interface-number ]
[ nexthop nexthop-address ]
Any view
process-id: OSPF process ID, in the range 1 to 65535.
interface interface-type interface-number: Specifies an interface via which to
display routing information advertised.
nexthop nexthop-address: Displays routing information with the specified next
hop.
Use the
display ospf routing
If no OSPF process is specified, routing table information of all OSPF processes is
displayed.
# Display OSPF routing table information.
<Sysname> display ospf routing
OSPF Process 1 with Router ID 192.168.1.2
Routing for Network
Destination
192.168.1.0/24
172.16.0.0/16
Area 0.0.0.0
LinkState ID AdvRouter
2.2.2.2 2.2.2.2
12.18.0.1 2.2.2.2
12.18.1.0 2.2.2.2
command to display routing table information.
Routing Tables
Cost Type NextHop
1562 stub 192.168.1.2
1563 Inter 192.168.1.1
Address 10.1.1.2
Sequence Age
80000004 1
80000003 1
80000002 2
Description
Neighbor router ID
Neighbor interface IP address
Interface address of the router
Area ID
Retransmit list
LSA type
Link state ID
Router ID of the advertising router
LSA sequence number
LSA age time
AdvRouter
192.168.1.2
192.168.1.1
Area
0.0.0.0
0.0.0.0