H3C MSR 20-20 Command Reference Manual page 1781

View Layer 2 module interface view, port group view
Parameters inbound: Configures LR for data streams received by the interface. For a device
which cannot be installed with an external interface module or when the number
of the interfaces is 4 or 9, this argument is not supported.
outbound: Configures LR for data streams sent by the interface.
cir committed-information-rate: CIR, with the value being 128, 256, 512, 1024,
2048, 4096 or 8192 kbps for a device which cannot be installed with an external
interface module or when the number of the interfaces on a layer 2 module is 4 or
9. If the number of interfaces on a layer 2 module is 16, 24 or 48, the value ranges
from 64 to 1000000, in steps of 64 kbps.
cbs committed-burst-size: CBS, with the value being 4096, 8192, 16384, 32768,
65536, 131072, 262144, 524288 bytes when the number of the interfaces on a
layer 2 module is 16, 24 or 48. It defaults to 4096 bytes. If the cbs
committed-burst-size configured by the user is not a specified one, the system
automatically selects the nearest one. For a device which cannot be installed with
an external interface module or when the number of the interfaces is 4 or 9, this
argument is not supported.
ebs excess-burst-size: This argument is not supported on the interface on a layer 2
module for a device which cannot be installed with an external interface module
or when the number of the interfaces on the layer 2 module is 4, 9, 16, 24 or 48.
Description Use the
interface.
Use the
Execute the command in interface view, and the setting is valid on the current
interface only. Port group is supported when the number of the interfaces on a
layer 2 module is 16, 24 or 48. If this command is executed in port group view, the
setting is valid on all ports.
Examples # Limit packet-forwarding rate of interface Ethernet1/0 to the normal rate 64
kbps. The CBS value is 8192 bytes.
<Sysname> system-view
[Sysname] interface Ethernet1/0
[Sysname-Ethernet1/0] qos lr outbound cir 64 cbs 8192
command to limit the transmitting or receiving rate of the
qos lr
command to remove the limit.
undo qos lr
1781