Vty Rtc-Client Remote; Vty Rtc-Server Remote - H3C MSR 20-20 Command Reference Manual

vty rtc-client remote

Syntax
View
Parameters
Description
Related command:
Example

vty rtc-server remote

Syntax
View
Parameters
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] vty 1 password simple abc
vty vty-number rtc-client remote ip-address port-number [ source source-ip ]
undo vty vty-number
Terminal template view
vty-number: VTY number, ranging 0 to 7.
ip-address: IP address of the RTC server.
port-number: Listening port number of the RTC server, ranging 1024 to 50000.
source source-ip: Source IP address bound.
Use the vty rtc-client remote
client.
Use the command to remove the specified VTY.
undo vty
Note that, after this configuration, no more Telnet VTYs, TTY VTYs, or RTC server
VTYs can be configured in the template of the VTY.
rta rtc-server listen-port and vty rtc-server remote.
# Create VTY 1 to serve as an RTC client, setting the IP address of the
corresponding RTC server to 1.1.1.1, the listening port of the RTC server to 9010,
and the source IP address to be used for establishing TCP connections to 2.2.2.2.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] vty 1 rtc-client remote 1.1.1.1 9010 source 2.2.2.2
vty vty-number rtc-server remote ip-address terminal-number
undo vty vty-number
Terminal template view
vty-number: VTY number, ranging 0 to 7.
ip-address: RTC client IP address.
command to create a VTY to serve as an RTC
923