Ripng Poison-Reverse; Ripng Split-Horizon - H3C MSR 20-20 Command Reference Manual

1320 C 85: IP 6 RIP
HAPTER V
Parameters
Description
Related commands:
Examples

ripng poison-reverse

Syntax
View
Parameters
Description
Examples

ripng split-horizon

Syntax
View
Parameters
C C
NG ONFIGURATION OMMANDS
value: Additional metric to advertised routes, in the range of 1 to 16.
Use the ripng metricout
routes advertised by an interface.
Use the
undo rip metricout
The default additional routing metric is 1.
ripng metricin.
# Set the additional metric to 12 for routes advertised by Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ripng metricout 12
ripng poison-reverse
undo ripng poison-reverse
Interface view
None
Use the
rip poison-reverse
Use the
undo rip poison-reverse
function.
By default, the poison reverse function is disabled.
# Enable the poison reverse function for RIPng update messages on Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ripng poison-reverse
ripng split-horizon
undo ripng split-horizon
Interface view
None
command to configure an additional metric for RIPng
command to restore the default.
command to enable the poison reverse function.
command to disable the poison reverse