Display Ip Routing-Table Acl - H3C MSR 20-20 Command Reference Manual

932 C 71: IP R
HAPTER OUTING

display ip routing-table acl

Syntax
View
Parameters
T C
ABLE OMMANDS
Destination: 127.0.0.0/8
Protocol: Direct
Preference: 0
NextHop: 127.0.0.1
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
State: Active NoAdv
Tag: 0
Destination: 127.0.0.1/32
Protocol: Direct
Preference: 0
NextHop: 127.0.0.1
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
State: Active NoAdv
Tag: 0
Displayed first are statistics for the whole routing table, followed by detailed
description of each route (in sequence).
Table 203 Description on the fields of the display ip routing-table verbose command
Field
Destination
Protocol
Process ID
Preference
Cost
NextHop
Interface
RelyNextHop
Neighbour
Tunnel ID
Label
State
Age
Tag
display ip routing-table acl acl-number [ verbose ]
Any view
acl-number: Basic ACL number, in the range of 2000 to 2999.
Process ID: 0
Interface: InLoopBack0
Neighbour: 0.0.0.0
Process ID: 0
Interface: InLoopBack0
Neighbour: 0.0.0.0
Description
Destination address/mask length
Protocol that presents the route
Process ID
Priority of the route
Cost of the route
Address of the next hop on the route
Outbound interface for packets to be forwarded along the route
The next hop address obtained through routing stack.
Neighboring address determined by Routing Protocol
Tunnel ID
Label
Status of the route, which could be Active, Inactive, Adv, or NoAdv.
Time that the route has been in the routing table, in the sequence of
hour, minute, and second from left to right.
Route tag
Cost: 0
Label: NULL
Age: 00h00m36s
Cost: 0
Label: NULL
Age: 00h00m36s