Display Mpls Lsp - H3C MSR 20-20 Command Reference Manual

1528 C 95: MPLS B
HAPTER
Parameter
Description
Related command:
Example

display mpls lsp

Syntax
View
Parameter
C C
ASICS ONFIGURATION OMMANDS
vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31
characters.
|: Filters the output information.
begin: Begins with the specified string.
include: Includes the specified string.
exclude: Excludes the specified string.
regular-expression: Regular expression, a string of 1 to 80 characters. No blank
space is acceptable.
Use the
display mpls ldp vpn-instance
a specified VPN instance.
mpls ldp (system view), mpls ldp (interface view).
# Display information about VPN instance vpn1.
<Sysname> display mpls ldp vpn-instance vpn1
--------------------------------------------------------------------
Protocol Version
Graceful Restart
MTU Signaling
--------------------------------------------------------------------
Instance ID
Instance Status
Hop Count Limit
Loop Detection
DU Re-advertise Timer
DU Explicit Request
Label Distribution Mode : Ordered
n
For description on the fields of the command output, see Table 370.
display mpls lsp [ { incoming-interface | outgoing-interface } interface-type
interface-number ] [ in-label in-label-value ] [ out-label out-label-value ] [ { exclude |
include } dest-addr mask-length ] [ vpn-instance vpn-instance-name ] [ asbr |
protocol { bgp | bgp-ipv6 | crldp | ldp | rsvp-te | static | static-cr } ] [ egress | ingress
| transit ] [ verbose ]
Any view
incoming-interface: Incoming interface of the LSPs.
outgoing-interface: Outgoing interface of the LSPs.
command to display information about
LDP Global Information
: V1 Neighbor Liveness
: Off FT Reconnect Timer
: On Recovery Timer
LDP Instance Information
: 1 VPN-Instance
: Active LSR ID
: 32 Path Vector Limit
: Off
: 30 Sec DU Re-advertise Flag : On
: Off Request Retry Flag
Label Retention Mode : Liberal
: 60 Sec
: 60 Sec
: 60 Sec
: vpn1
: 1.1.1.9
: 32
: On