82
balance (IPv6 address family view)
Syntax
View
Parameters
Description
Related commands:
Examples
bestroute as-path-neglect (IPv6 address family view)
Syntax
View
Parameters
IP
6 BGP C
V
C
OMMANDS
balance number
undo balance
IPv6 address family view
number: Number of BGP routes participating in load balancing, in the range 1 to
8. When it is set to 1, no load balancing is available.
Use the
command to configure the number of routes participating in
balance
IPv6 BGP load balancing.
Use the
undo balance
The feature is not available by default.
Unlike IGP, BGP has no explicit metric for making load balancing decision. Instead,
it implements load balancing by defining its routing rule.
display ipv6 routing-table on page 942.
# Set the number of routes participating in IPv6 BGP load balancing to 2.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] balance 2
bestroute as-path-neglect
undo bestroute as-path-neglect
IPv6 address family view
None
ONFIGURATION
command to restore the default.