Qos Policy - H3C MSR 20-20 Command Reference Manual

1806 C 110: D
HAPTER EFINING
View
Parameters
Description
Examples

qos policy

Syntax
View
Parameters
Description
Related commands:
Examples
P C
OLICY OMMANDS
Layer 2 interface view/port group view
inbound: Inbound direction.
policy policy-name: Policy name, a string of characters in the range 1 to 31.
Use the
qos apply policy
Use the undo qos apply policy
the interface.
The command is valid when the number of the interfaces on a layer 2 module is
16, 24 or 48.
Execute the command in interface view, and the setting is valid on the current
interface only; execute the command in port group view, and the setting is valid
on all ports in the port group.
# Apply the policy USER1 in the inbound direction of interface Ethernet1/0.
<Sysname> system-view
[Sysname] interface Ethernet1/0
[Sysname-Ethernet1/0] qos apply policy USER1 inbound
qos policy policy-name
undo qos policy policy-name
System view
policy policy-name: Policy name, a string of characters in the range 1 to 31.
Use the
qos policy
Use the
undo qos policy
The policy cannot be deleted if it is applied on an interface. It is necessary to
remove application of the policy on the current interface before deleting it via the
undo qos policy command.
policy-name should not be the policy defined by the system. The "default" is the
policy defined by the system.
classifier behavior, qos apply policy (interface view).
# Define a policy named as USER1.
command to apply associated policy to the interface.
command to delete the associated policy from
command to define a policy and enter policy view.
command to delete a policy.