Pim Timer Hello; Pim Timer Join-Prune - H3C MSR 20-20 Command Reference Manual

1418 C 90: PIM C
HAPTER
Description
Example

pim timer hello

Syntax
View
Parameter
Description
Related command:
Example

pim timer join-prune

Syntax
View
Parameter
C
ONFIGURATION OMMANDS
Use the pim timer graft-retry
Use the
undo pim timer graft-retry
By default, the graft retry period is 3 seconds.
# Set the graft retry period to 80 seconds on Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim timer graft-retry 80
pim timer hello interval
undo pim timer hello
Interface view
interval: Hello interval in seconds, with an effective range of 1 to 2,147,483,647.
Use the
pim timer hello
interval at which hello messages are sent.
Use the
undo pim timer hello
By default, hello messages are sent at the interval of 30 seconds.
timer hello (PIM view).
# Set the hello interval to 40 seconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim timer hello 40
pim timer join-prune interval
undo pim timer join-prune
Interface view
interval: Join/prune interval in seconds, with an effective range of 1 to
2,147,483,647.
command to configure the graft retry period.
command to restore the default setting.
command to configure on the current interface the
command to restore the default setting.