Explicit-Path; List Hop - H3C MSR 20-20 Command Reference Manual

1604 C 96: MPLS TE C
HAPTER
Description
Example

explicit-path

Syntax
View
Parameter
Description
Example

list hop

Syntax
C
ONFIGURATION OMMANDS
Use the enable traffic-adjustment advertise
adjacency.
Use the
undo enable traffic-adjustment advertise
forwarding adjacency.
By default, forwarding adjacency is disabled.
Forwarding adjacency allows OSPF to include static LSP tunnels in SPF calculation
but not advertise them to OSPF neighbors.
# Enable forwarding adjacency when the IGP protocol is OSPF.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] enable traffic-adjustment advertise
# Enable forwarding adjacency when the IGP protocol is IS-IS.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] enable traffic-adjustment advertise
explicit-path pathname [ disable | enable ]
undo explicit-path pathname
System view
pathname: Name of an explicit path for a tunnel, a string of 1 to 31 characters.
disable: Disables explicit routing.
enable: Enables explicit routing.
Use the
explicit-path
Use the undo explicit-path
# Create an explicit path named path1 and enter its view.
<Sysname> system-view
[Sysname] explicit-path path1
[Sysname-explicit-path-path1]
list hop [ ip-address ]
command to create an explicit path and enter its view.
command to remove an explicit path.
command to enable forwarding
command to disable