Display Qos Lr Interface - H3C MSR 20-20 Command Reference Manual

display qos lr interface

Syntax
View
Parameters
Description
Examples
107
L R
INE ATE
C
OMMANDS
display qos lr interface [ interface-type interface-number ]
Any view
interface-type interface-number: Specifies an interface by its type and number.
Use the
display qos lr interface
statistics of an interface or all interfaces.
If no interface is specified, the LR configuration and running statistics of all
interfaces will be displayed.
# Display LR configuration and statistics information of all interfaces.
<Sysname> display qos lr interface
Interface: Ethernet1/0
Direction: Outbound
CIR 10 (kbps), CBS 1875 (byte),
Passed : 0/0 (Packets/Bytes)
Delayed: 0/0 (Packets/Bytes)
Active Shaping: NO
Direction: Inbound
CIR 10 (kbps), CBS 1875 (byte),
Passed : 0/0 (Packets/Bytes)
Delayed: 0/0 (Packets/Bytes)
Active Shaping: NO
Table 475 Description on the fields of the display qos lr command
Field Description
Interface Interface name, consisting of interface type and interface number
Direction Indicates the direction of line rate, i.e. inbound or outbound
CIR Committed Information Rate, in kbps
CBS Committed Burst Size, i.e. the depth of token bucket carrying burst
traffic, in byte
EBS Excess Burst Size, i.e. the size of the burst traffic exceeding the
committed traffic in dual-token bucket algorithm, in byte
C
ONFIGURATION
command to view LR configuration and
EBS 0 (byte)
EBS 0 (byte)
1779