Display Ospf Peer Statistics - H3C MSR 20-20 Command Reference Manual

display ospf peer statistics

Syntax
View
Parameters
Description
Table 271 Description on the fields of the display ospf peer verbose command
Field
State
Mode
Priority
DR
BDR
MTU
Dead timer due in 33 sec
Neighbor is up for
93:12:38
Authentication Sequence
Neighbor state change
count
# Display brief OSPF neighbor information.
<Sysname> display ospf peer
OSPF Process 1 with Router ID 1.1.1.1
Area: 0.0.0.0
Router ID Address
1.1.1.2 1.1.1.2
Table 272 Description on the fields of the display ospf peer command
Field
Area
Router ID
Address
Pri
Dead time
Interface
State
display ospf [ process-id ] peer statistics
Any view
process-id: OSPF process ID, in the range 1 to 65535.
Use the
display ospf peer statistics
statistics.
Description
Neighbor state: Down, Init, Attempt, 2-Way, Exstart, Exchange,
Loading or Full
Neighbor mode for DD exchange: Master or Slave
Router priority
The DR on the interface's network segment
The BDR on the interface's network segment
Interface MTU
Dead timer times out in 33 seconds
The neighbor has been up for 93:12:38
Authentication sequence number
Counts of neighbor state changes
Neighbor Brief Information
Pri Dead-Time Interface
1 40
Description
Area of neighbors
Neighbor router ID
Neighbor interface address
Router priority
Dead interval remained
The Interface connected to neighbors
Neighbor state: Down, Init, Attempt, 2-Way, Exstart,
Exchange, Loading or Full
command to display OSPF neighbor
State
Eth0/1/0 Full/DR
1125