Display Pim Routing-Table - H3C MSR 20-20 Command Reference Manual

display pim routing-table

Syntax
View
Parameter
Interface: Ethernet1/2
Uptime: 00:00:10
Expiry time: 00:00:30
DR Priority: 1
Generation ID: 0x2ACEFE15
Holdtime: 105 s
LAN delay: 500 ms
Override interval: 2500 ms
State refresh interval: 60 s
Neighbor tracking: Disabled
display pim [ vpn-instance vpn-instance-name | all-instance ] routing-table
[ group-address [ mask { mask-length | mask } ] | source-address [ mask { mask-length
| mask } ] | incoming-interface [ interface-type interface-number | register ] |
outgoing-interface { include | exclude | match } { interface-type interface-number |
register } | mode mode-type | flags flag-value | fsm ] *
Any view
vpn-instance-name: VPN instance name, a case sensitive string of up to 31
characters.
all-instance: Specifies all VPN instances.
group-address: Multicast group address, in the range of 224.0.0.0 to
239.255.255.255.
source-address: Multicast source address.
mask: Mask of the multicast group/source address, 255.255.255.255 by default.
mask-length: Mask length of the multicast group/source address, in the range of 0
to 32. The system default is 32.
incoming-interface: Displays routing entries that contain the specified interface
as the incoming interface.
interface-type interface-number: Specifies an interface by its type and number.
register: Specifies the register interface. This keyword is valid only if mode-type is
not specified or is sm.
outgoing-interface: Displays routing entries of which the outgoing interface is
the specified interface.
include: Displays routing entries of which the OIL includes the specified interface.
exclude: Displays routing entries of which the OIL does not include the specified
interface.
1401