Default-Route Imported (Ipv6 Address Family View); Display Bgp Ipv6 Group - H3C MSR 20-20 Command Reference Manual

1226 C 82: IP 6 BGP C
HAPTER V
Examples

default-route imported (IPv6 address family view)

Syntax
View
Parameters
Description
Examples

display bgp ipv6 group

Syntax
View
Parameters
Description
C
ONFIGURATION OMMANDS
value. In the case that all other conditions are the same, the system first selects the
route with the smaller MED value as the best route for the autonomous system.
# Devices A and B belong to AS100 and device C belongs to AS200. C is the peer
of A and B. Configure the MED of A as 25 to make C select the path from B.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] default med 25
default-route imported
undo default-route imported
IPv6 address family view
None
Use the
default-route imported
default route into the IPv6 BGP routing table.
Use the
undo default-route imported
By default, the redistribution is not enabled.
# Enable the redistribution of default route from OSPFv3 into IPv6 BGP.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] default-route imported
[Sysname-bgp-af-ipv6] import-route ospfv3 1
display bgp ipv6 group [ ipv6-group-name ]
Any view
ipv6-group-name: Peer group name, a string of 1 to 47 characters.
Use the display bgp ipv6 group
information.
If no ipv6-group-name is specified, information about all peer groups is displayed.
command to enable the redistribution of
command to disable the redistribution.
command to display IPv6 peer group