Display Ospf Nexthop - H3C MSR 20-20 Command Reference Manual

display ospf nexthop

Syntax
View
Parameters
Description
Examples
Table 269 Description on the fields of the display ospf 1 lsdb network command
Field
Type
LS ID
Adv Rtr
LS Age
Len
Options
Seq#
Chksum
Net Mask
Attached Router
display ospf [ process-id ] nexthop
Any view
process-id: OSPF process ID, in the range 1 to 65535.
Use the display ospf nexthop
If no OSPF process is specified, next hop information of all OSPF processes is
displayed.
# Display OSPF next hop information.
<Sysname> display ospf nexthop
OSPF Process 1 with Router ID 192.168.0.1
Routing Nexthop Information
Next Hops:
Address Refcount
----------------------------------------------------------------
192.168.0.1 1
192.168.0.2 1
192.168.1.1 1
Table 270 Description on the fields of the display ospf nexthop command
Field Description
Next hops Information about Next hops
Address Next hop address
Refcount Reference count, indicating the number of routes using the nexthop
IntfAddr Outbound interface address
Intf Name Outbound interface name
Description
LSA type
DR IP address
Router that advertised the LSA
LSA age time
LSA length
LSA options
LSA sequence number
LSA checksum
Network mask
ID of the router that established adjacency with the DR, and ID of
the DR itself
command to display OSPF next hop information.
IntfAddr
192.168.0.1
192.168.0.1
192.168.1.1
Intf Name
Ethernet1/0
Ethernet1/0
Ethernet1/1
1123