Timer Query (Igmp View) - H3C MSR 20-20 Command Reference Manual

1362 C 88: IGMP C
HAPTER
Related command:
Example

timer query (IGMP view)

Syntax
View
Parameter
Description
Related commands:
Example
C
ONFIGURATION OMMANDS
Use the undo timer other-querier-present
default.
By default, the IGMP other querier present interval is [ IGMP query interval ] times
[ IGMP querier robustness variable ] plus [ maximum response time for IGMP
general queries ] divided by two.
n
The three parameters in the above-mentioned formula default to 60 (seconds), 2
(times) and 10 (seconds) respectively, so the default other querier present interval
= 60 × 2 + 10 / 2 = 125 (seconds).
igmp timer other-querier-present, timer query (IGMP view), robust-count
(IGMP view), max-response-time (IGMP view), display igmp interface.
# Set the global value of the other querier present interval to 200 seconds in the
public instance.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] timer other-querier-present 200
timer query interval
undo timer query
Public instance IGMP view, VPN instance IGMP view
interval: IGMP query interval in seconds, namely interval between IGMP general
queries sent by the querier, with an effective range of 1 to 18,000.
Use the
timer query
Use the
undo timer query
By default, IGMP query interval is 60 seconds.
igmp timer query, timer other-querier-present (IGMP view), display igmp
interface.
# Set the global value of the IGMP query interval to 125 seconds in the public
instance.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] timer query 125
command to configure the IGMP query interval globally.
command to restore the default setting.
command to restore the system