Filter-Policy Import (Ospf View); Graceful-Restart (Ospf View) - H3C MSR 20-20 Command Reference Manual

Related commands:
Examples

filter-policy import (OSPF view)

Syntax
View
Parameters
Description
Examples

graceful-restart (OSPF view)

Syntax
View
import-route (OSPF view).
# Filter redistributed routes using ACL 2000.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] filter-policy 2000 export
filter-policy { acl-number | ip-prefix ip-prefix-name | gateway ip-prefix-name }
import
undo filter-policy import
OSPF view
acl-number: Number of the basic or advanced ACL used to filter routing
information by destination address, in the range 2000 to 3999.
ip-prefix-name: Name of an IP address prefix list used to filter received routes, a
string of up to 19 characters.
gateway ip-prefix-name: Name of an IP address prefix list used to filter routes
received from the specified neighbors, a string of up to 19 characters.
Use the
filter-policy import
routes.
Use the undo filter-policy import
By default, no filtering of incoming routes is configured.
# Filter received routes using ACL 2000.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 192.168.10.0 0.0.0.255
[Sysname-acl-basic-2000] quit
[Sysname] ospf 100
[Sysname-ospf-100] filter-policy 2000 import
graceful-restart [ nonstandard | ietf ]
undo graceful-restart
OSPF view
command to configure the filtering of incoming
command to disable the filtering.
1133