Maximum Load-Balancing (Ripng View); Preference - H3C MSR 20-20 Command Reference Manual

1316 C 85: IP 6 RIP
HAPTER V
Related commands:
Examples

maximum load-balancing (RIPng view)

Syntax
View
Parameters
Description
Examples

preference

Syntax
View
Parameters
C C
NG ONFIGURATION OMMANDS
You can configure a routing policy to redistribute only needed routes.
■
You can specify a cost for redistributed routes using keyword cost.
■
default cost on page 1280.
# Redistribute IPv6-IS-IS routes (process 7) and specify the metric as 7.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] import-route isisv6 7 cost 7
maximum load-balancing number
undo maximum load-balancing
RIPng view
number: Maximum number of equal-cost load-balanced routes, in the range 1 to
8.
Use the
maximum load-balancing
of equal cost routes for load balancing.
Use the
undo maximum load-balancing
n
You need configure the maximum number according to the memory size.
# Set the maximum number of equal cost load balanced routes to 2.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] maximum load-balancing 2
# Restore the default.
[Sysname-ripng-100] undo maximum load-balancing
preference [ route-policy route-policy-name ] preference
undo preference [ route-policy ]
RIPng view
route-policy-name: Name of a routing policy, in the range of 1 to 19 characters.
command to specify the maximum number
command to restore the default.