Pim Ipv6 Hello-Option Lan-Delay; Pim Ipv6 Hello-Option Neighbor-Tracking - H3C MSR 20-20 Command Reference Manual

Example

pim ipv6 hello-option lan-delay

Syntax
View
Parameter
Description
Related command:
Example

pim ipv6 hello-option neighbor-tracking

Syntax
View
Parameter
Description
# Set the IPv6 PIM neighbor timeout time to 120 seconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 hello-option holdtime 120
pim ipv6 hello-option lan-delay interval
undo pim ipv6 hello-option lan-delay
Interface view
interval: Prune delay in milliseconds, with an effective range of 1 to 32,767.
Use the
pim ipv6 hello-option lan-delay
delay time on the current interface.
Use the undo pim ipv6 hello-option lan-delay
default setting.
By default, the prune delay to 500 milliseconds.
pim ipv6 hello-option override-interval, hello-option override-interval
(IPv6 PIM view), and hello-option lan-delay (IPv6 PIM view).
# Set the prune delay time to 200 milliseconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 hello-option lan-delay 200
pim ipv6 hello-option neighbor-tracking
undo pim ipv6 hello-option neighbor-tracking
Interface view
None
Use the pim ipv6 hello-option neighbor-tracking
suppression, namely enable neighbor tracking, on the current interface.
Use the
undo pim ipv6 hello-option neighbor-tracking
join suppression.
By default, join suppression is enabled, namely neighbor tracking is disabled.
command to configure the prune
command to restore the
command to disable join
command to enable
1487