Maximum Load-Balancing(Ospfv3 View); Log-Peer-Change - H3C MSR 20-20 Command Reference Manual

1298 C 84: IP 6 OSPF
HAPTER V

log-peer-change

Syntax
View
Parameters
Description
Examples

maximum load-balancing(OSPFv3 view)

Syntax
View
Parameters
Description
Examples
3 C C
V ONFIGURATION OMMANDS
# Configure OSPFv3 process 100 to redistribute the routes found by OSPFv3
process 160.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] import-route ospfv3 160
log-peer-change
undo log-peer-change
OSPFv3 view
None
Use the log-peer-change
changes.
Use the
undo maximum load-balancing
With this feature enabled, information about neighbor state changes of the
current OSPFv3 process will display on the configuration terminal.
# Disable the logging on neighbor state changes of OSPFv3 process 100.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] undo log-peer-change
maximum load-balancing maximum
undo maximum load-balancing
OSPFv3 view
maximum: Maximum number of load-balanced routes, in the range 1 to 8. The
argument being set to 1 means no load balancing is available.
Use the
maximum load-balancing
number of load-balanced routes.
Use the
undo maximum load-balancing
# Configure the maximum load-balanced routes as 6.
command to enable the logging on neighbor state
command to disable the logging.
command to configure the maximum
command to restore the default.