Ripng Metricin; Ripng Metricout - H3C MSR 20-20 Command Reference Manual

Parameters
Description
Examples

ripng metricin

Syntax
View
Parameters
Description
Related commands:
Examples

ripng metricout

Syntax
View
process-id: RIPng process number, in the range of 1 to 65535.
Use the
ripng enable
Use the
undo ripng enable
interface.
By default, RIPng is disabled on an interface.
# Enable RIPng100 on Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ripng 100 enable
ripng metricin value
undo ripng metricin
Interface view
value: Additional metric to received routes, in the range of 0 to 16.
Use the
ripng metricin
RIPng routes.
Use the undo ripng metricin
By default, the additional metric to received routes is 0.
ripng metricout.
# Specify the additional routing metric as 12 for RIPng routes received by
Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ripng metricin 12
ripng metricout value
undo ripng metricout
Interface view
command to enable RIPng on the specified interface.
command to disable RIPng on the specified
command to specify an additional metric for received
command to restore the default.
1319