Print Language; Redrawkey - H3C MSR 20-20 Command Reference Manual

Related command:
Example

print language

Syntax
View
Parameters
Description
Example

redrawkey

Syntax
View
Parameters
Description
Use the
undo print menu
information.
By default, terminal menu information is printed.
This command takes effect only in TTY and Telnet terminal access. Make sure you
enable the router to print characters on the terminal before using this command.
print information.
# Enable the printing of terminal menu information on the terminal
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] print menu
print language { chinese | english }
Terminal template view
chinese: Prints prompt information in Chinese.
english: Prints prompt information in English.
Use the
print language
information.
By default, the prompt information is printed in Chinese on the terminal.
# Set the language of the prompt information printed on the terminal to English.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] print language english
redrawkey ascii-code&<1-3>
undo redrawkey
Terminal template view
ascii-code&<1-3>: ASCII value of hotkey, ranging 1 to 255. "&<1-3>" means that
you can provide up to three ASCII values.
Use the command to set the hotkey for terminal redrawing.
redrawkey
command to disable the printing of terminal menu
command to set the language of the printed prompt
911