H3C MSR 20-20 Command Reference Manual page 1344

1344 C 87: M
HAPTER ULTICAST
Description
Related command:
Example
R F C
OUTING AND ORWARDING
multicast source address, this argument has an effective value range of 0 to 32.
The system default is 32 in both cases.
incoming-interface: Specifies the incoming interface of multicast routing entries.
interface-type interface-number: Specifies an interface by its type and number.
register: Specifies the register interface.
all: Specifies to clear all the routing entries from the multicast routing table.
Use the reset multicast routing-table
entries from the multicast routing table.
When a route entry is deleted from the multicast routing table, the corresponding
forwarding entry is also deleted from the multicast forwarding table.
reset multicast forwarding-table, display multicast routing-table and
display multicast forwarding-table.
# Clear the route entries related to multicast group 225.5.4.3 from the multicast
routing table of the public instance.
<Sysname> reset multicast routing-table 225.5.4.3
# Clear the route entries related to multicast group 226.1.2.3 from the multicast
routing table of VPN instance mvpn.
<Sysname> reset multicast vpn-instance mvpn routing-table 226.1.2.3
C
ONFIGURATION OMMANDS
command to clear multicast routing