Pim Hello-Option Dr-Priority - H3C MSR 20-20 Command Reference Manual

1412 C 90: PIM C
HAPTER
View
Parameter
Description
Related command:
Example

pim hello-option dr-priority

Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION OMMANDS
Interface view
None
Use the pim dm
Use the
undo pim dm
By default, PIM-DM is disabled.
Note that PIM-DM cannot be used for multicast groups in the SSM group range.
pim sm, ssm-policy (PIM view).
# Enable PIM-DM on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim dm
pim hello-option dr-priority priority
undo pim hello-option dr-priority
Interface view
priority: Router priority for DR election, in the range of 0 to 4294967295. A larger
value of this argument means a higher priority.
Use the pim hello-option dr-priority
for DR election on the current interface.
Use the
undo pim hello-option dr-priority
setting.
By default, the router priority for DR election is 1.
hello-option dr-priority (PIM view).
# Set the router priority for DR election to 3 on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim hello-option dr-priority 3
command to enable PIM-DM.
command to disable PIM-DM.
command to configure the router priority
command to restore the default