Log-Peer-Change - H3C MSR 20-20 Command Reference Manual

982 C 72: BGP C
HAPTER
Description
Examples

log-peer-change

Syntax
View
Parameters
Description
Examples
C
ONFIGURATION OMMANDS
route-policy-name: Name of a routing policy used to filter redistributed routes, a
string of 1 to 19 characters.
Use the import-route
specified routing protocol and advertise redistributed routes.
Use the
undo import-route
routing protocol.
By default, BGP does not redistribute routes from other protocols.
The ORIGIN attribute of routes redistributed with the import-route command is
incomplete.
# In BGP view, redistribute routes from RIP.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] import-route rip
# In BGP-VPN instance view, redistribute routes from RIP (the VPN has been
created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] import-route rip
log-peer-change
undo log-peer-change
BGP view
None
Use the log-peer-change
going up and down.
Use the
undo log-peer-change
By default, the function is enabled.
# Enable BGP logging on peers going up and down.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] log-peer-change
command to configure BGP to redistribute routes from a
command to disable route redistribution from a
command to enable the global BGP logging on peers
command to disable the function.