Display Multicast Routing-Table Static - H3C MSR 20-20 Command Reference Manual

1332 C 87: M
HAPTER ULTICAST

display multicast routing-table static

Syntax
View
Parameter
Description
Example
R F C
OUTING AND ORWARDING
<Sysname> display multicast routing-table
Multicast routing table of VPN-Instance: public net
Total 1 entry
00001. (172.168.0.2, 227.0.0.1)
Uptime: 00:00:28
Upstream Interface: Ethernet1/1
List of 2 downstream interfaces
1: Ethernet1/2
2: Ethernet1/0
Table 324 Description on the fields of display multicast routing-table
Field
00001
(172.168.0.2, 227.0.0.1)
Uptime
Upstream interface
List of 2 downstream
interfaces
display multicast routing-table [ vpn-instance vpn-instance-name | all-instance ]
static [ config ] [ source-address { mask-length | mask } ]
Any view
vpn-instance-name: VPN instance name, a case sensitive string of up to 31
characters.
all-instance: Specifies all VPN instances.
config: Displays the configuration information of static routes.
source-address: Multicast source address.
mask: Mask of the multicast source address.
mask-length: Mask length of the multicast source address, in the range of 0 to 32.
Use the
display multicast routing-table static
information of multicast static routes.
# View all the multicast static routes in the public instance.
<Sysname> display multicast routing-table static
Multicast Routing Table of VPN-Instance: public net
Routes : 1
Mroute 10.10.0.0/16
Interafce = Ethernet1/0
Matched routing protocol = <none>, Route-policy = <none>
C
ONFIGURATION OMMANDS
Description
Sequence number of the (S, G) entry
An (S, G) entry of the multicast forwarding table
Length of time for which the (S, G) entry has been up, in
hours:minutes:seconds
Upstream interface the (S, G) entry: multicast packets should
arrive at this interface
Downstream interface list: these interfaces need to forward
multicast packets
command to view the
RPF Neighbor = 10.10.0.254