Display Ipv6 Routing-Table Ipv6-Address1 Ipv6-Address2 - H3C MSR 20-20 Command Reference Manual

Examples

display ipv6 routing-table ipv6-address1 ipv6-address2

Syntax
View
Parameters
Description
Examples
# Display brief routing information for the specified destination IPv6 address and
prefix.
<Sysname> display ipv6 routing-table 10::1 127
Routing Table:
Summary Count: 3
Destination: 10::/64
NextHop : ::
Interface : NULL0
Destination: 10::/68
NextHop : ::
Interface : NULL0
Destination: 10::/120
NextHop : ::
Interface : NULL0
# Display brief information about the matched route with the longest prefix
length.
<Sysname> display ipv6 routing-table 10:: 127 longer-match
Routing Tables:
Summary Count : 1
Destination: 10::/120
NextHop : ::
Interface : NULL0
Refer to Table 209 for description about the above output.
display ipv6 routing-table ipv6-address1 prefix-length1 ipv6-address2 prefix-length2
[ verbose ]
Any view
ipv6-address1/ipv6-address2: An IPv6 address range from IPv6 address1 to IPv6
address2.
prefix-length1/prefix-length2: Prefix length, in the range 0 to 128.
verbose: Displays both active and inactive verbose routing information. Without
this keyword, only brief active routing information is displayed.
Use the
display ipv6 routing-table
display routes with destinations falling into the specified IPv6 address range.
# Display routes with destinations falling into the IPv6 address range.
<Sysname> display ipv6 routing-table 3:: 32 4:4:: 64
Routing Table :
Summary Count : 3
Destination: 100::/64
NextHop : ::
Interface : NULL0
Destination: 200::/64
NextHop : ::
Protocol
Preference: 60
Cost
Protocol
Preference: 60
Cost
Protocol
Preference: 60
Cost
Protocol
Preference: 60
Cost
ipv6-address1 ipv6-address2 command to
Protocol
Preference: 60
Cost
Protocol
Preference: 60
945
: Static
: 0
: Static
: 0
: Static
: 0
: Static
: 0
: Static
: 0
: Static