Display Ospfv3 - H3C MSR 20-20 Command Reference Manual

1282 C 84: IP 6 OSPF
HAPTER V

display ospfv3

Syntax
View
Parameters
Description
Examples
3 C C
V ONFIGURATION OMMANDS
display ospfv3 [ process-id ]
Any view
process-id: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.
Use the
display ospfv3
process ID is specified, OSPFv3 brief information about all processes will be
displayed.
# Display brief information about all OSPFv3 processes.
<Sysname> display ospfv3
Routing Process "OSPFv3 (1)" with ID 1.1.1.1
SPF schedule delay 5 secs, Hold time between SPFs 10 secs
Minimum LSA interval 5 secs, Minimum LSA arrival 1 secs
Number of external LSA 0. These external LSAs' checksum Sum 0x0000
Number of AS-Scoped Unknown LSA 0
Number of LSA originated 3
Number of LSA received 0
Number of areas in this router is 1
Area 0.0.0.1
Number of interfaces in this area is 1
SPF algorithm executed 1 times
Number of LSA 2. These LSAs' checksum Sum 0x20C8
Number of Unknown LSA 0
Table 298 Description on the fields of the display isofv3 command
Field
Routing Process "OSPFv3 (1)" with ID 1.1.1.1
SPF schedule delay
Hold time between SPFs
Minimum LSA interval
Minimum LSA arrival
Number of external LSA
These external LSAs' checksum Sum
Number of AS-Scoped Unknown LSA
Number of LSA originated
Number of LSA received
Number of areas in this router
Area
Number of interfaces in this area
SPF algorithm executed 1 times
Number of LSA
command to display OSPFv3 brief information. If no
Description
OSPFv3 process is 1, and router ID is
1.1.1.1.
Delay interval of SPF calculation
Hold time between SPF calculations
Minimum interval for generating LSAs
Minimum LSA repeat arrival interval
Number of ASEs
Sum of all the ASEs' checksum
Number of LSAs with unknown
flooding scope
Number of LSAs originated
Number of LSAs received
Number of areas this router attached
to
Area ID
Number of interfaces attached to this
area
SPF algorithm is executed 1 time
Number of LSAs